Light Controls

From powerful and easy-to-use software and elegant control panels to integration with audio visual and building management systems, iLight's range offeres the ultimate in interfacing.

Browse all products below or jump directly to a specified section:

Inductive Leading Edge Source Controllers • Adaptive Leading or Trailing Edge Source Controllers • Trailing Edge Source Controllers • Combined Source Controllers • HF Ballast Controllers • Switched Relay Controllers • DINrail Mounted Source Controllers • Control Plate Range • Colour Touchscreens • Interfaces • Software • Low Voltage Sensors • System Accessories

Inductive Leading Edge Source Controllers

iCAN Source Controllers The iCAN source controllers from iLight are mechanically elegant, practical to use and above all safe.They offer unrivalled choice of control, with a substantial range of options to offer the specifier, installer and user to build up any size of system in virtually any combination. All products are future proof due to their software-based structure and upgradeable firmware.

Our extensive experience in architectural lighting controls has enabled us to incorporate a wealth of small, detailed features that collectively make the best all round source controller available today.

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

	SCI0110T	1 x 10 Amp inductive source controller module Suitable for 10 Amp single phase supply Dimensions: 240x220x80mm Weight: 2.5 Kilograms Input isolator not included Click to download PDF datasheet Click to download PDF Installation Guide
	SCI0405S SCI0405N SCI0405D SCI0405RCBO SCI0405RCBOX	4 x 5 Amp inductive source controller module Suitable for 20 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 280x220x155mm (D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm) Weight: 4 Kilograms (RCBO & RCBOX - 4.5 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCI0410S SCI0410N SCI0410D SCI0410RCBO SCI0410RCBOX	4 x 10 Amp inductive source controller module Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 400x220x155mm Weight: 7 Kilograms (D, RCBO & RCBOX - 8 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCI0420S SCI0420N SCI0420D SCI0420RCBO SCI0420RCBOX	4 x 20 Ampinductive source controller module Suitable for 80 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 375x330x155mm (D - 450x330x155mm. RCBO & RCBOX - Consult iLight) Weight: 9 Kilograms (SCI0420D - 12 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCI1205S SCI1205N SCI1205D SCI1205RCBO SCI1205RCBOX	12 x 5 Amp inductive source controller module 12 x 5 Amp iCAN inductive source controller module Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions: 550x220x155mm (D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm) Weight: 10 Kilograms (RCBO & RCBOX - 11.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide
	SCI1210S SCI1210N SCI1210D SCI1210RCBO SCI1210RCBOX	12 x 10 Amp inductive source controller module Suitable for 40 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions: 850x330x155mm Weight: 18 Kilograms (D, RCBO, RCBOX - 19.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide
	SCI1220S SCI1220N SCI1220D SCI1220RCBO SCI1220RCBOX	12 x 20 iCAN inductive source controller module Suitable for 80 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions 850x330x155mm (RCBO & RCBOX - Consult iLight) Weight 22 Kilograms (SCI1220D - 23.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide

Adaptive Leading or Trailing Edge Source Controllers

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

	SCA0410S SCA0410N SCA0410D SCA0410RCBO SCA0410RCBOX	4 x 10 Amp adaptive source controller module Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 375x330x155mm (RCBO & RCBOX - Consult iLight) Weight: 9 Kilograms (SCA0410D - 10 Kilograms) Input isolator not included Click to download PDF datasheet Click to download PDF Installation Guide
	SCA1210S SCA1210N SCA1210D SCA1210RCBO SCA1210RCBOX	12 x 10 Amp adaptive source controller module Suitable for 40 Amp 3 phase supply MCB protection behind lockable hinged cover Dimensions: 850x330x155mm (RCBO & RCBOX - Consult iLight) Weight: 18 Kilograms (SCA1210D - 19.5 Kilograms) Input isolator not included Click to download PDF datasheet Click to download PDF Installation Guide

Trailing Edge Source Controllers

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

	SCT0405S SCT0405N SCT0405D SCT0405RCBO SCT0405RCBOX	4 x 5 Amp trailing edge source controller module Suitable for 20 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 280x220x155mm (RCBO & RCBOX - 340x255x155mm) Weight: 4 Kilograms (RCBO & RCBOX - 4.5 Kilograms) Not suitable for magnetic loads. Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCT1205S SCT1205N SCT1205D SCT1205RCBO SCT1205RCBOX	12 x 5 Amp trailing edge source controller module Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 550x220x155mm (RCBO & RCBOX - 550x255x155mm) Weight: 10 Kilograms (RCBO & RCBOX - 11.5 Kilograms) Not suitable for magnetic loads. Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide

Combined Source Controllers

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

SCI0805T SCI0805S SCI0805N SCI0805RCBO SCI0805RCBOX

8 x 5 Amp source controller, 40 Amp single phase supply 4 circuits of inductive leading edge, 4 circuits of 1-10V, DSI and DALI ballast control and 4 relays for power switching of non-dim loads. Dimensions 400x220x155mm (RCBO & RCBOX - 440x255x155mm) Weight: 7 Kilograms (RCBO & RCBOX - 8 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide

HF Ballast Controllers

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

	SCH0410S SCH0410N SCH0410D SCH0410RCBO SCH0410RCBOX	4 x 10 Amp HF Ballast controller module 1-10V, DSI or Broadcast DALI control Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 280x220x155mm (D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm) Weight: 4 Kilograms (D, RCBO & RCBOX - 5 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCH1210S SCH1210N SCH1210D SCH1210RCBO SCH1210RCBOX	12 x 10 Amp HF Ballast controller module 1-10V, DSI or Broadcast DALI control Suitable for 40 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions: 550x220x155mm (D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm) Weight: 9 Kilograms (D, RCBO & RCBOX - 10.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide
	SCH1220S SCH1220N SCH1220D SCH1220RCBO SCH1220RCBOX	12 x 20 Amp HF Ballast controller module 1-10V, DSI or Broadcast DALI control Suitable for 80 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions: 550x220x155mm (D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm) Weight: 9 Kilograms (D, RCBO & RCBOX - 10.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide
	SCH1200T	12 channel 1-10V/DSI/ Broadcast DALI ballast controller. (Control only, no power switching). 12 Channel Control Module Dimensions: 240x220x80mm Weight: 3 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide

Switched Relay Controllers

S - Single Pole    N - Neutral Disconnect    D - Double Pole    T - Terminals   
RCBO - RCBO Breakers    RCBOX - Field fitting of RCBOs

	SCS0410S SCS0410N SCS0410D SCS0410RCBO SCS0410RCBOX	4 x 10 Amp switched relay source controller module Suitable for 40 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 280x220x155mm (D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm) Weight: 4 Kilograms (D, RCBO & RCBOX - 5 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCS0420S SCS0420N SCS0420D SCS0420RCBO SCS0420RCBOX	4 x 20 Amp switched relay source controller module Suitable for 80 Amp single phase supply MCB protection behind lockable hinged cover Dimensions: 280x220x155mm (D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm) Weight: 4 Kilograms (D, RCBO & RCBOX - 5 Kilograms) Input isolator only included on RCBO and RCBOX versions Click to download PDF datasheet Click to download PDF Installation Guide
	SCS1210S SCS1210N SCS1210D SCS1210RCBO SCS1210RCBOX	12 x 10 Amp switched relay source controller module Suitable for 40 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions: 550x220x155mm (D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm) Weight: 9 Kilograms (D, RCBO & RCBOX - 10.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide
	SCS1220S SCS1220N SCS1220D SCS1220RCBO SCS1220RCBOX	12 x 20 Amp switched relay source controller module Suitable for 80 Amp 3 phase supply MCB protection behind lockable hinged cover Input isolator included (except 'D' version) Dimensions 550x220x155mm (D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm) Weight: 9 Kilograms (D, RCBO & RCBOX - 10.5 Kilograms) Click to download PDF datasheet Click to download PDF Installation Guide

DINrail Mounted Source Controllers

An alternative to the iLight modular rack system is the DINrail mounted system. The DINrail range utilises the same connectivity as our other products but is designed specifically for the systems integration market. All of the key components are DIN rail mounting enabling installers and integrators to construct their own systems to suit particular projects.

At the heart of the iCANdin system is the Master Processor Module (MPM). Each MPM can control 24 channels of dimming or switching via the slave power devices. Up to 256 MPM units can be connected to a single iCAN network, making this an extraordinarily scalable and powerful system.

	MPM2400	Master control of up to 24 channels of switching and dimming Built in system power supply Use with SCMI, SCMS, SCMR & SCMH slave units Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMI0402	4 x 2Amp Inductive Leading Edge Source Controller Connects to MPM Max total load 5A Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMS0410	4 x 10Amp Switching Source Controller Connects to MPM Max total load 16A Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMS0810	8 x 10Amp Switching Source Controller Connects to MPM Max total load 16A Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMC0410	4 x 10Amp Change Over Relay & HF Controller Connects to MPM 4 x 10Amp Change Over Relay & HF Controller 4 x Independent low voltage outputs Max total load 40A Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMR0816	8 x 16 Amp Feed-Through Relay Controller Connects to MPM Switches resistive, inductive and capacitive lighting loads Dimensions: 160x90x58mm Weight: 1 Kilograms Click to download PDF datasheet Click to download PDF Installation Guide
	SCMH0410	4 x 10Amp HF Ballast Controller Connects to MPM 1-10V, DSI or DALI control output Max total load 16A Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMA0402	4 x 2Amp Adaptive Leading or Trailing Edge Source Controller Max total load 10A Dimensions: 227x90x48mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide
	SCMD6400	64 x Addressable DALI Ballasts Controller Module, 16 groups Max total load 16A (Switched outputs) Dimensions: 160x90x58mm Weight: 1 Kilogram Click to download PDF datasheet Click to download PDF Installation Guide

Control Plate Range

From powerful and easy-to-use software and elegant control panels to integration with Audio Visual and Building Management Systems, the iLight range offers the ultimate in interfacing.

The iLight control panel range can be configured to match any specification for scene setting, graphical touch screen control, time based scene selection, sequencing, and simple manual fader control. There are three control plate ranges available, our Classic range, the Classic Plus range and the slim & elegant Architrave range.

	KENSINGTON	Kensington Control Plate Series Low profile design Screw or concealed fixing Wide choice of finishes and configurations Dimensions: 86x86mm Click to download PDF datasheet Click to download PDF Installation Guide
	CLASSIC	Classic Control Plate Series Single and double gang formats Screw or concealed fixing Wide choice of finishes and configurations Dimensions: 86x86mm Click to download PDF datasheet Click to download PDF Installation Guide
	CLASSIC PLUS	Classic Plus Control Plate Series Single gang format Screw or concealed fixing Choice of special order finishes and configurations Dimensions: 86x86mm Click to download PDF datasheet Click to download PDF Installation Guide
	ARCHITRAVE	Architrave Control Plate Series Screw or concealed fixing Choice of special order finishes Available with up to 7 buttons per panel Dimensions: 42x90mm (concealed fixing) 38x86mm (screw fixing type) Click to download PDF datasheet Click to download PDF Installation Guide
	REVIO	Revio Control Plate Series Labelling, color, style, language and logos completely customisable Printed inserts easily produced to your requirements Scene and Zone control from one plate Dimensions: 70x123mm Click to download PDF datasheet Click to download PDF Installation Guide
	INEO	Ineo Control Plate Series Available in Black, White & Ivory finishes Customisable button engraving Wide choise of configurations Dimensions: 83x121mm Click to download PDF datasheet Click to download PDF Installation Guide

Colour Touchscreens

The LCD colour touchscreens offer the ultimate solution in flexible, intuitive and user friendly interfacing to the lighting control system and for controlling linked systems. They offer a manageable solution to control a wide range of functions in an individual location or as a central control for multiple areas.

The touchscreens can be used to provide control of other integrated systems such as audio visual, curtains, blinds heating and air conditioning.

	TSC30	3.5" TFT LCD screen with analogue touch overlay Fully customisable graphic layouts Wide choice of special order bezel finishes Fits Double gang UK backbox Dimensions: 146x86mm Click to download PDF datasheet Click to download PDF Installation Guide
	TSC50	5.7" TFT LCD screen with analogue touch overlay 65000 Colours available Fully customisable graphic layouts Choice of special order finishes and configurations Dimensions: 220x169mm Click to download PDF datasheet Click to download PDF Installation Guide

Interfaces

iLight manufactures a range of integration tools to assist with the construction and configuration of the iCAN network and for interfacing with external system components.

	BN-2	Bridge iLight network segment to iLight network segment bridge device Repeater where cable lengths exceed 1000m 16 sequences each with a maximum of 128 actions Programmable sequence capability Message filtering and isolation for large networks Dimensions: 124 x 49 x 23mm Click to download PDF datasheet
	SI-2	System Integrator Node The bi-directional System Integrator Node allows control of a wide range of third party equipment through the iLight user interfaces including audio systems, TVs, projectors, blinds, curtains, heating and HVAC systems, security & fire alarms, surveillance and CCTV. The SI-2 converts iLight protocol into third party device compatible RS232 protocol enabling a sequence of commands to start from the touch of a button. For example in a home cinema - lights dim, blinds close, audio system turns on, screen opens, projector turns on and the DVD starts. Configurable RS232 COMMS via 9 pin female D type (Send/Recieve) Adjustable baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 1 x iCAN Bus data connection via screw terminals Status LEDs 20 programmable serial commands - triggered from the iLight network 16 sequences each with a maximum of 128 actions Dimensions: 124 x 49 x 23mm Click to download PDF datasheet
	RI-2	Relay Interface The Relay Interface provides a versatile interface between the iLight network and other control systems. The unit is fully configurable and may be programmed to perform switching functions for curtain or blind control, AV and presentation equipment or drive contactors for heavier power applications. 8 relay outputs 8 inputs - programmable as analogue or digital used for volt free switches or motion detectors 16 sequences each with a maximum of 128 actions Audio Visual RS485 port, 2 alarm inputs Dimensions: 240 x 220 x 90mm 3 Kg Click to download PDF datasheet
	SCD24	DMX Controller The SCD24 is a 24 channel DMX controller. It is designed to provide scene set dimming for any DMX512 controlled load via the iLight network. DMX controller 24 channels 128 scene memory iLight network inputs Dimensions: 240 x 220 x 80mm 3 Kg Click to download PDF datasheet Click to download PDF Installation Guide
	SCD96	DMX Controller The SCD96 is a 96 channel DMX source controller. It is designed to provide scene set dimming output for any DMX512 controlled load. The unit incorporates 8 general purpose 3A relay devices which overlay channels 1-8 and 8 digital outputs which overlay channels 9-16. DMX controller 96 channels 8 x 3A general rating change over relays 128 scene memory iLight network inputs Dimensions: 240 x 220 x 80mm 3 Kg Click to download PDF datasheet
	EG-1	Ethernet Gateway The Ethernet Gateway to iLight network provides connection between an iLight network and an Ethernet LAN. This allows a user to control and configure the iLight system using iCANsoft on a LAN network PC rather than by connecting directly into the network. Where a wireless LAN is in place (or by connecting a wireless router into the EG-1) the user can access the network with a Wi-Fi enabled PC, giving freedom of movement during commissioning. The Ethernet Gateway also facilitates connection to the internet when used with iCANsoft, a firewall, ISP and an Ethernet hub, this then enables remote connection for controlling, programming and obtaining diagnostics of the lighting control system. Configurable IP address Facilitates internet and Wi-Fi LAN connection into the iLight network Dimensions: 240 x 220 x 80mm 3 Kg Click to download PDF datasheet Click to download PDF Installation Guide
	UIG-2	Universal Interface The UIG allows other items such as partition switches or PE cells to provide inputs to the iLight network. When configured for a room join, moving the partition will open or close a magnetic proximity switch contact (not included) and automatically re-program the function of the control panels within the room. 4 x 0-10V analogue inputs for volt free switches or motion detectors 4 volt free contact closure inputs 4 switch outputs for LED indication 16 sequences each with a maximum of 128 actions Fits standard UK style double gang 35mm deep back box Click to download PDF datasheet
	UIM	Mini UIG The Mini UIG also allows other items to provide inputs to the iLight network and is often used with third party and custom faders and switches. 6 inputs which each can be individually configured as 0-10V analogue, digital or photoelectric cell inputs 8 sequences with up to 30 steps per sequence Only 42mm Ø so easily fits in European and UK junction and back boxes Click to download PDF datasheet Click to download PDF Installation Guide
	STARBOX	Starwire Interface Starwire interface enabling the iLight network to be locally split up six ways. Click to download PDF datasheet Click to download PDF Installation Guide

Software

iCANsoft is iLight’s application software. It allows users to set up, configure, programme and monitor the iCAN system. It’s intuitive, wizard based format has been especially designed to provide simple, easy to follow on screen help functions that guide systems integrators, electrical contractors and end users through the programming process.

Programming - This view provides a physical view of the iCAN network and all devices connected to it. Intuitive wizards allow quick and easy set up of the iCAN system. Components can be added easily via through drop down menus or drag and drop. It is also possible to name and configure the devices.

Offline programming options allow engineers to set up the networks off site, greatly reducing onsite programming time. Once on site, the engineers can search for the network components and identify all devices in the installation. Engineers can then “talk” to the devices and make any changes if required.

iCANsoft also provides wizards to help create stunning bespoke touch screens in the minimum of time. Templates allow you to configure and programme the number and action of the buttons on the screen whilst an ever increasing number of design styles allow totally unique graphics to be created.

Configuring - Area Explorer is the virtual view of the network. In this view it is possible to create up to 255 areas within a single network segment. In a hotel for example these areas might include the lobby, reception, ballroom, and the restaurant. Using iCANsoft you can name these areas logically so they are easy to identify and program.

Once areas have been named, devices can be easily assigned to them by dragging and dropping them into the relevant areas. Users can then use the programming wizards to select preset scenes, set levels and fade time, configure room joins and much more.

Monitoring - iCANsoft’s monitoring options are an invaluable tool for larger iCAN systems. They provide maintenance staff and commissioning engineers with a comprehensive diagnostics package for managing the system.

Network monitor can be used to identify devices on the network, log and record network traffic, identifying system usage, help monitor lamp life and identify network faults.

	SW-2	Software Kit This kit allows engineers to connect their PC to the iLight system and configure the network using iCANsoft. PC Node - Serial Port to iLight network interface Includes a copy of iCANsoft on CD to allow the iLight network to be configured from a PC Includes USB cable Click to download PDF datasheet
	iCANview - FLOORPLAN	iCANview - Floorplan iCANview Floor plan stand alone software is used for monitoring a lighting installation using a floor plan layout based on original customer supplied drawings. Click to download PDF datasheet
	iCANview - SCENE CONTROL	iCANview - Scene Control iCANview Floor plan stand alone software is used for operating a lighting installation from a PC using graphic layouts based on original customer supplied images. Click to download PDF datasheet
	Lightfactory	Lightfactory DMX Control Software Unique and powerful PC based lighting control system. Interfaces to iCAN networks using SI-2 System Integrator LED DMX systems Complex effects Advanced LED and matrix control Media playback Click to download PDF datasheet

Low Voltage Sensors

These standard units allow the iLight system functions to be triggered automatically from a sensor. They either detect the infrared radiation given off when somebody enters an area or detect ambient lighting levels and send a signal to the iLight interface unit (UIG or UIM). All these units are powered from the iCAN network.

	PI1C	Ceiling Mounted Motion Detector Low voltage Passive Infrared Detector with open collector output, suitable for flush mounting to suspended ceilings, includes retaining clip. Detection range approx 5m from ceiling height 2.4m. May be used in groups to cover larger areas. On time duration after trigger fully programmable within iCANsoft. Interior use only. Click to download PDF datasheet
	PE1C	Ceiling Mounted Photocell Low voltage Photocell Detector, suitable for flush mounting to suspended ceilings, includes retaining clip. May be used as a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range at surface 0-1000 lux approx. Positioned as look down detector, Interior use only. Click to download PDF datasheet
	PE1EXT	External Photocell Low voltage exterior Photocell Detector, suitable for surface mounting. May be used for a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range approx 0-10,000 lux IP54 rated. Click to download PDF datasheet
	AXCS01SRJ	Combined PIR, Daylight and I/R Sensorl This low voltage multi sensor combines PIR presence detection and a photocell in one compact flush mounting design using an RJ12 connector on the rear of the unit. The action of the photocell and PIR presence detector are separate. Ideal for intelligent lighting control systems that deploy system programmed intelligence. This multi sensor is perfect for applications where space is at a premium. Click to download PDF datasheet

System Accessories

In addition to our interfacing tools iLight also provide a number of accessories to further enhance the capability and usability of the iCAN control system.

	TC-1	Astronomical Time Clock The TC-1 is a surface mounting electronic time clock with astronomical facility and LCD display. It connects to the iLight network and is fully programmable using either the front panel keyboard or iCANsoft™ PC based software for daily or date specific events. 255 events 8 sequences with up to 30 steps per sequence Scene selection and programming Channel level raise and lower Click to download PDF datasheet
	HH17IR	iLight hand held remote 8 scene buttons Off button Raise and lower controls 6 additional configurable buttons Click to download PDF datasheet